Ferri-Iron Tablets: Why They’re Homeowners’ Best Friend

Seeing iron in pool water is something no homeowner wants to deal with. However, using the right product, removing iron from pool water can be very easy, leaving little for the owner to do. The best product to remove iron from water is Ferri-Iron tablets.

These tablets only need to be added to the pool water where they will then discolor any parts that have been discolored by iron, manganese or any other minerals. After the stain has been decolorized, it will be removed by the filter as well as charge neutralization and flocculation. Ferri-Iron tablets are extremely safe as they do not contain toxic ingredients like some other iron removal products. They also do not contain caustic materials or chemicals that will corrode metal or your pool liner. Ferri-Iron tablets are also free of diatomaceous earth, alum, and any other chemicals; they are also completely soluble in water.

One of the great things about Ferri-Iron tablets, which makes them different from any other iron removal product, is that they do not affect the pH or chlorine levels in swimming pools. With other products, you generally need to reduce both levels, as the product will interfere with them and could cause you other bigger problems, such as metal corroding in and around the pool and its parts. However, because Ferri-Iron tablets work so closely with your pool filter, it’s important to make sure your filter is turned on and in proper working order.

Ferri-Iron tablets should be added to skimmer baskets in the pool, approximately 1 tablet per 3,000 gallons of pool water. When the pool is very large and has several baskets, the tablets must be evenly distributed throughout all the baskets. The tablets must be added over a period of several hours, with the filter on at all times. Once all tablets have been used in the water, the filter should be backwashed within 18 to 24 hours of final treatment.

When there is a high presence of iron in the water, additional treatments with Ferri-Iron tablets may be required. In these cases, the filter should be backwashed within 24 to 48 hours after treatment.

Seeing green pool water caused by too much iron can be very alarming for pool owners. But with Ferri-Iron tablets, it doesn’t have to be that way. Pop in some tablets, wait for them to do their job, and then wait until your pool is clean and ready to swim again. Ferri-Iron tablets truly are a homeowner’s best friend!