Importance of mold removal
Mold is not only ugly to look at, but it can also be a serious health hazard. Therefore, mold removal is an important job that requires careful and precise work to remove it completely. Mold remediation may seem easy. After all, once mold is found, it can be removed. Unfortunately, things are not that simple. The problem is that mold will occasionally dry out. When this happens, it will send spores into the air. These spores not only create more mold but are also very poisonous. Therefore, mold remediation is all about the total removal of mold.
The following are some basic mold inspection and removal techniques. First, the source of the mold must be identified. If you can’t find this yourself, the right thing to do would be to enlist the help of a mold inspector. Once the problem area has been identified, it is important to contain the area. Some people use Visqueen to seal off an area before the walls open. Whenever you do this type of work, make sure you are properly protected, such as wearing gloves and face masks. However, if possible, it is always better to use professional help.
In most cases, mold testing will reveal that mold is forming due to moisture or humidity. Mold needs organic matter to thrive. This is why if there is any type of organic matter present, such as wood, and if moisture is present, then this would be a sure recipe for mold to form. However, it is possible to prevent mold from forming in the first place. On the other hand, if the mold hasn’t spread more than 10 to 15 square feet, you may be able to do it yourself. Anything larger than that can be dangerous to the person doing it, unless it’s done by a professional.
Once mold testing has been done, there are several different ways to remove it. One of the most common ways is to use household bleach. However, everyone knows that prevention is better than cure. If possible, keep the house as dry as possible. The optimum humidity percentage would be between 40 and 50 percent humidity. Windows must be sealed to prevent condensation. It also likes mold to form around leaking pipes. If there are any, then they should be repaired immediately.